TB-303 Template A TB-303 emulation of one sawtooth oscillator going through a very high Q filter with a simple decaying envelope. Legato notes will glide and do not retrigger the filter envelope unless the velocity is at least 100. To use the 5 performance editor knobs correctly you need to have sets 1+2 or sets 3+4 on. Some controls work in pairs, so you will not get useful results if you change only one set of edit knobs. PE1+2 Knob 1: Filter Cutoff Knob 2: Filter Resonance Knob 3: Decay time of filter envelope Knob 4: Amount of filter envelope Knob 5: Mixes distortion into the sound These control the basic TB-303 type settings. Make sure you turn a knob fully left and right before judging what the parameter affects. PE 3+4 Knob 1: Mix in a detuned second oscillator Knob 2: Modulate the waveform with a slow LFO Knob 3: Mix in chorus effect Knob 4: - Knob 5: - Note: Setting knobs 1,2 and 3 all the way down gives a plain sawtooth, setting then all up gives a VERY fat sound. Wheel 1: Pitch bend up and down a fifth Wheel 2: Adds vibrato Wheel 3 Up: - Wheel 3 Down: - Ribbon X: Centered pitch bend for the ribbon Ribbon Y: - Velocity: No effect Key position: No effect (like the original)
The patch is downloadable as a sysex SYX format HERE.